Canon GL2
-
Our factory-trained technicians are able to repair your Canon GL2 camcorder.
-
We will provide you with the most cost-effective solution to your problem.
Our technicians are experts and specialize in this particular model. Our efficient, prompt service comes from factory-authorized training.
For contact with Canon technician feel free to contact us at: repair@procamfix.com.
Equipment Services:
Our technicians know how to ensure the quality, precision, long life, and intrinsic value of your product. Furthermore, they strive to find the best solution for your individual needs – from counsel to repair & maintenance services.
Our repair service includes:
Free Return Shipping, Free Repair Estimate, 3-Month Parts and Labor Warranty,
Free Rush Repair Service
We will examine the problem and replace required parts, such as:
- Tape Deck Problem: error codes C:31:00 C:32:10 C:31:11 C:32:11 C:31:20 C:32:20 C:31:21 C:32:21 C:31:22 C:32:22 C:31:23 C:32:23 C:31:30 C:21:00, eject the tape message, video and audio dropout, video break up on playback, video pixilate on right or left side on the screen, the tape is jammed, camcorder does not eject the tap, the camcorder damages the tape
- Camera LCD Problem: Touch screen does not work, the image is scrolling, black LCD screen in both camera/playback mode
- Lens unit Problem: Lens goes out of focus, image blurred, image goes out of focus after 5-10 minutes and error codes E:61:00 E:61:10 E:61:11 E:61:30 E:62:00 E:62:01 E:62:02 E:62:03 E:62:10 E:61:30 E 62:11 E 62:12 E:62:20 C:32:60
- Main PCB/Lens Problem: Back focus problems, soft focus, it does not focus at all, does not focus at all
- Zoom PCB Problem: zooming on its own, zoom rocker broken
- Video Head Problem: blank screen when playing, error codes C:31:40 C:32:40 C:31:42 C:32:42 C:20:00
- Fire Wire Jack/PCB Problem: computer does not recognize the camera/camcorder
- CCD Problems: black or blurred image, color problems
- Fuse/Power Board Problem: the camera/camcorder does not turn on, flash does not work
- Memory Card Slot Problem: error memory card, camera/camcorder can’t read the memory card
Some solutions for some common problems when following error messages shown:
- Check the Lens attachment.
- No Lens Attached.
Make sure you are using a compatible lens.
IMPORTANT: If attaching the camera body to an astronomical telescope or other similar device, (depending on your camera) it will be necessary to do one of the following:
- Set the mode dial to Manual (M).
- Set the Release w/oLens option in the camera menu to Enable.
- Set the Shutter lock option in the camera menu to Off: no lens.
NOTE: Some Lensbaby™ lenses may attach to the camera body. However, Lensbaby lenses do not communicate electronically with the camera body and cannot be recognized. Sony does not support the use of Lensbaby lenses.
Check if the lens is connected properly.
NOTE: If the lens is not attached properly, the connection points that enable communication between the camera body and lens do not make contact. Do not push the lens release button, but turn the lens clockwise and attach to the camera body until it clicks.
- Lens release button position
- Turn off the camera.
- Remove the lens from the body of the camera.
- Examine the pins on the body of the camera that connect to the lens
